Metal 3D Printing -- Simpler, Safer, Smarter.
Somerville, MA
Joined May 2023
- Tweets10
- Following5
- Followers30
- Likes1
We're excited about your response to the Mesa 1, and are here to share more about how we've brought metal 3D printing to your desktop.
In the video below, we'll dive into the process we use to print metal, the safety considerations we've taken, and how/when you can order one.
1
26
Cofounder Casey explains how the Mesa 1 works: youtube.com/watch?v=EQYrbzl2…
1
22
To overcome the barriers to owning & using a metal printer, we engineered a new printing technology and an easy-to-use ecosystem of software, hardware, & materials.
The Mesa 1 uses no lasers or binders; there’s no support removal or loose metal powder to handle after a print.
ALT An image of the printer, the slicer, and the materials for the Studio 3e8 Mesa 1 metal printing system. The printer, the Mesa 1, is centered. To the left, a laptop with a slicer software is open, showing a cross section of the gear that was printed in the video in the previous post. To the right are three materials cartridges, labeled Scaffold, Carbon Steel, and Copper. Additional callouts highlight that the printer plugs into a standard wall outlet, and contains a built-in sintering furnace. A variety of steel and copper 3D printed parts are displayed on the table as well.
2
1
47
Studio 3e8 has spent the past three years developing metal 3D printing for your desktop: simpler, safer, smarter.
Today, we’re thrilled to reveal the Mesa 1.
Launching on Kickstarter Dec 1; orders starting at $3,500.
Want first access to updates?🔗⬇️
1
1
34
Introducing the Mesa 1. Tomorrow, 10/28, 10 AM ET, LinkedIn.
Metal 3D printing -- safer, simpler, smarter.
#3DPrinting
