Graham Blackwell

My timeline is inundated with advice on copying GIFs at the moment 🙈 – at Cheadle, England

Nice plate #ste33r – at Stockport, England

Meeting with the client today. The hpc is now at 94% utilisation which I'm sure they will be happy with. We're going to need to expand it sooner rather than later. – at Ashley, England

Good morning from Cheshire – at Stockport, England

Got to be wildberry metallic, with black leather. I've just got to find one with the right extras now for the right price and with a hefty dealer contribution #bmw #m3touring – at Anstey, England

Rear suspension and gearbox done. Wings next. #mygale #formulaford #3dprinted – at Anstey, England

Front suspension done. With negative camber. A bit more toe in than I wanted but this is the first attempt. Uses Lego axles and wheels. – at Anstey, England

Second attempt and I just need to adjust arm lengths to give 0 toe and some -ve camber. – at Anstey, England

Front suspension designed to take Lego wheels and axles. Printing now. Then it's the gearbox I need to print for the rear suspension to attach to. – at Anstey, England

Lego sized now. The chatgpt conversion from Forza horizon 7 fbx format to .SLT is bang on. This is 1mm thick and 150mm long. Gearbox next I think. Then suspension and wheels and wings. Bambu P2S PLA. #mygale #FordRacing – at Anstey, England

With all the pylons removed it's not too bad. Printing a larger scale would remove the lines. I will try a vertical print too. – at Anstey, England

Not bad for a first pass. – at Anstey, England

Printing the Mygale this morning. First go at using chatgpt to convert the fbx file to STL. It's just 100mm long but can go up to 250mm if I wanted to. – at Anstey, England

Photo to chatgpt to STL. Nice. youtu.be/TUqScwjnO_k?is=Ipoy… – at Newtown Linford, England

Is this even real? The openbugbounty.org links in the message won't load. 🙈

The Bambu P2S threw a wobbly this morning when a section of the Pink PLA snapped off inside the pipes in the AMS. Easy enough to push out using a longer piece of PLA and now she's all good again. – at Anstey, England

A new aero part. Printing the opposite side next. – at Anstey, England

For goodness sake sort the web pages out. Bodies of text keep moving randomly as adverts and videos load and change. It makes reading the content almost impossible from a mobile device. Use height tags on the videos and adverts to set their heights please 🥺 @Motorsport – at Anstey, England

This F1 race hasn't lived up to expectations so far. When is the restart? Taking forever – at Anstey, England

Nooo the Christmas adverts have started today 🙈 – at Anstey, England